Impact Wrenches – How to Choose the Right Tool

Impact wrenches are powered socket tools, powered by compressed air or electricity, they are one of the most shared and useful tools in both the specialized, and serious amateur workshop. Impact wrenches work by spinning a “hammer” to a high speed, and then suddenly engaging the socket, to deliver a sudden burst of torque. While electric (both mains and cordless) and hydraulic models are obtainable, it is the air impact wrench which is by far the most popular.

Air impact wrenches are by far the most popular of all air tools, and if you’re doing any serious amount of automotive work you’ll definitely want one. Before you rush out and make a buy however, there are a associate of considerations – strength source, and socket size. strength source will depend on your budget, and what tools you already have. Socket size will depend on the kind of work you’re doing.

As already mentioned, air impact wrenches are by far the most popular, but that doesn’t average they are your only choice. While they are comparatively inexpensive, and offer good strength, they do need a compressor as a strength source. Unless you already have a appropriate compressor that will add a important amount to the cost of the tool. If you don’t have a appropriate compressor, and are doing only occasional or light automotive work (such as in a home workshop) then an electric or cordless wrench is probably a better bet. These days the cordless wrenches are more than capable of light work, and are reasonably priced.

Your other main choice will be socket size. Most impact wrenches are obtainable in sizes from 1/4″ to 2″ and already larger. For the home workshop a 1/2″ is usually sufficient, with a 1″ excursion being more appropriate if you’re working on SUVs or light commercial vehicles. If you’re working on big rigs then a 2″ excursion might be needed. Larger than 2″ is typically only used for industrial purposes.

There is one other choice to me made, and that is style. The smallest wrenches are shaped like a screwdriver, but they are only capable of delivering low torque. Most 1/2″ wrenches are of the “pistol grip” variety, shaped like an electric hand drill. As you move up to heavier duty tools you’ll start to come across D and T grips which allow for a much firmer keep up, and so much higher torque levels. The correct style for you will depend on the kind of work you’ll be doing, so take that into consideration when making a buy.

Once you have decided on a strength source, socket size and style it’s time to hit the stores. Good quality wrenches are made by a number of suppliers such as Ingersol, Draper, Sealy, Makita and more. Shop around for a good deal, and be sure to check out the online stores as there are real bargains to be had!

Leave a Reply